PhUSE 2015 Scriptathon Agenda

From PHUSE Wiki
Revision as of 10:36, 30 September 2015 by DanteDT (talk | contribs) (Task Matrix)
Jump to: navigation, search

PhUSE 2015 Annual Conference Scriptathon Agenda


References


Task Overview

Project Target Specification Code Test Plan
Central Tendency Fig. 7.1 docx (github)

(Annotate white paper, as a reference)

SAS and R -to do-
  • Refine SAS approach to create Fig. 7.1 (sgplot/gtl rather than qc/shewhart approach)
  • Refine the R approach to create Fig. 7.1 (data-driven approach)
  • Use Fig. 7.1 scripts as starting point for scripts for remaining targets
  • Write Specifications
  • Write Tests Plan to be used to qualify scripts:
  • What tests should be included for convincing "qualification"?
  • Participants could start a list of minimum test scenarios for WPCT-F.07.01.sas and WPCT-F.07.01.R
  • Writing the test plan is helpful, implementation can follow.


Script Targets

  • Figure 7.2. Box Plot – Change in xxx Over Time
  • Figure 7.3. Box Plot – Observed Values and Change in xxx Over Time
  • Figure 7.5. Scatter Plot of Baseline Versus Endpoint Measurements for xxx
  • Figure 7.6
  • Figure 7.6A. Box Plot – Last Baseline and Last Post-baseline Measures
  • Figure 7.6B. Box Plot – Minimum Baseline and Minimum Post-baseline Measures
  • Figure 7.6C. Box Plot – Maximum Baseline and Maximum Post-baseline Measures
  • Figure 7.7
  • Figure 7.7A. Box Plot – Change From Last Baseline to Last Post-baseline Measures
  • Figure 7.7B. Box Plot – Change From Minimum Baseline to Minimum Post-baseline Measures
  • Figure 7.7C. Box Plot – Change From Maximum Baseline to Maximum Post-baseline Measures
  • Figure 7.8. Box Plot – Last/Minimum/Maximum Baseline and Last/Minimum/Maximum Post-baseline Measures and Change from Last/Minimum/Maximum Baseline to Last/Minimum/Maximum Post-baseline Measures


Task Matrix

Target Specification Code Test Plan
Figure 7.1. Box Plot – Observed Values of xxx Over Time Fig. 7.1 docx (github)

(Annotate white paper, as a reference)

SAS and R (Test Plan template, as a starting point)
Figure 7.2. Box Plot – Change in xxx Over Time
Figure 7.3. Box Plot – Observed Values and Change in xxx Over Time
Figure 7.5. Scatter Plot of Baseline Versus Endpoint Measurements for xxx
Figure 7.6 A/B/C. Box Plot – Last/Min/Max Baseline and Last/Min/Max Post-baseline Measures
Figure 7.7 A/B/C. Box Plot – Change From Last/Min/Max Baseline to Last/Min/Max Post-baseline Measures
Figure 7.8. Box Plot – Last/Min/Max Baseline and Last/Min/Max Post-baseline Measures and Change from Last/Min/Max Baseline to Last/Min/Max Post-baseline Measures


  • SAS
  • Better SAS box plot approach - draft a modern but straightforward ODS/SGPLOT/GTL approach to replace our current obscure SAS/QC PROC SHEWHART approach
  • Test suitability of current approach of template programs that use a custom macro library. See WPCT_F.07.01.sas to get started, suggest changes & improvements
  • Write new scripts from WPCT_F.07.01.sas to create Figure 7.1 from LAB and ECG test data. What changes does this require to the template script?
  • Enthusiastic testers can dive in and test any components in the SAS macro library that we've written to support WPCT_F.07.01.sas


  • R


PhUSEWiki Maintenance

  • Update CSS (cascading style sheet ).
  • Categorize Wikis based on list of Wikis that currently do not belong into a category (Uncategorized Pages).
  • Clean up Wikis, which are not linked (Orphan pages).
  • Clean up files, which are not linked (Unused Files).
  • Remove dummy/inactive users.
  • Create training material.